MRD1CL1002C3 CHEVROLET Coolant Monte Carlo

Review CHEVROLET Rareelectrical New Coolant Level Sensor Fits Z34 Cyl 3.8l By Mrd1cl1002 for MONTE CARLO

The MRD1CL1002C3 coolant level sensor is a crucial component for maintaining the optimal coolant level in the cooling system of a Chevrolet Monte Carlo with a 3.8L Z34 engine. This sensor is designed to provide accurate and reliable readings to the vehicle's engine control module (ECM), allowing it to adjust the coolant level as needed.

The MRD1CL1002C3 sensor uses a float design, which allows it to measure the coolant level by sensing the position of the float as the coolant level rises and falls. This float is connected to a resistor, and as the coolant level changes, the resistance of the sensor also changes, sending a signal to the ECM.

The sensor housing is made of high-quality materials that are resistant to corrosion and can withstand the extreme temperatures and pressure of the cooling system. The sensor is also sealed to prevent coolant from entering the sensor and causing damage.

The MRD1CL1002C3 coolant level sensor is easy to install and replace, with a plug-and-play design that connects directly to the wiring harness. It comes with all necessary hardware for installation, including mounting brackets and sensor gaskets.

This coolant level sensor is a replacement part, and it is specifically designed to fit the Chevrolet Monte Carlo with a 3.8L Z34 engine. It is important to note that using a sensor from a different vehicle or engine may not provide accurate readings and could potentially cause damage to the vehicle's cooling system.

In conclusion, the MRD1CL1002C3 coolant level sensor is an essential component for maintaining the optimal coolant level in the cooling system of a Chevrolet Monte Carlo with a 3.8L Z34 engine. It is designed to provide accurate and reliable readings, is resistant to corrosion, and is easy to install and replace. This sensor is a replacement part, and it is important to use the correct sensor for your specific vehicle and engine to ensure proper operation and prevent potential damage.

The MRD1CL1002C3 coolant level sensor is a crucial component in the cooling system of a Chevrolet Monte Carlo Z34 with a 3.8L engine. This sensor is responsible for monitoring the coolant level in the engine and signaling the vehicle's warning system when the coolant level drops below the optimal level. Here are some pros and cons of buying this specific coolant level sensor:

1. OEM Part: This coolant level sensor is an original equipment manufacturer (OEM) part, which means it is designed and manufactured by the same company that produced the original part in your vehicle. Using an OEM part can assure you of the best fit, function, and durability.

2. Reliable: A faulty coolant level sensor can cause the check engine light to come on and may lead to engine damage. By replacing the sensor with a new OEM part, you can ensure that your cooling system will function reliably and effectively.

3. Easy installation: The coolant level sensor is a relatively simple component to replace, and the installation process is straightforward. You can typically complete the installation in under an hour with basic hand tools.

1. Cost: OEM parts can be more expensive than aftermarket parts. The cost of the MRD1CL1002C3 coolant level sensor may be higher than some aftermarket alternatives.

2. Availability: Depending on the availability of the part from your dealership or supplier, you may experience a delay in receiving the sensor and completing the repair.

The MRD1CL1002C3 coolant level sensor is an essential component in maintaining the cooling system of your Chevrolet Monte Carlo Z34. While the cost may be higher than some aftermarket alternatives, the benefits of using an OEM part include reliable performance, easy installation, and a direct fit to your vehicle. If you value the peace of mind that comes with using original equipment, then the MRD1CL1002C3 coolant level sensor is a worthwhile investment.

If you are experiencing issues with your coolant level sensor or want to replace a worn-out sensor as a preventative measure, consider purchasing the MRD1CL1002C3 coolant level sensor from a reputable Chevrolet dealership or parts supplier. By using an OEM part, you can ensure that your cooling system continues to function reliably and effectively.

Details:

New coolant level sensor fits Chevrolet Monte Carlo z34 6 cyl 3.8l by mrd1cl1002: replaces part numbers specifications.: coolant level sensor, specifications: notes: 2 terminal quantity; grey color; female connector gender; oblong shape; plastic, metal, and rubber material; push on mounting type; pin type, fit: direct fit, replaces: manufacturer part number: mrd1cl1002, product notice. All parts sold are new. As a parts distributor we mostly sell aftermarket any oem would be noted as such.

Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but designed to function same as - if better than.

specifications oilpanpete:

• for models: Monte, Carlo
• brand: Chevrolet
• mpn: Mrd1cl1002c3
• country of origin: Taiwan
• type: Coolant Level Sensor
• california prop 65 warning: This Product May Expose You To Chemicals Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
• source: Aftermarket

returns oilpanpete:

• paid by: seller
• time: 30 days
• policy: returns accepted

shipping oilpanpete:

• transit: 6-11 days
• service: economy, standard, expedited, overnight
• type: fixed
• class: economy, standard, expedited, one-day

offer oilpanpete:

• options: ship-to-home
• sold #: 17
• availability: in stock
• started: november 25, 2025
• in stock #: 5
• prices: $33.92–$189.60
• item condition:
  • New
  • Used

general oilpanpete:

• category: Auto Parts > Car Truck Accessories > Engines > Oil Pans

seller oilpanpete:

• # reviews: 119056
• city: atlanta, georgia
• rating: 98.5%

payments oilpanpete:

• wallet: apple-pay
• other
• credit card: diners-club